Post-Construction Cleaning in Chandler, AZ

Rough, final and touch-up cleaning for general contractors, builders and property managers. We get new builds and remodels ready for walk-through, handover and opening day.

Construction leaves more behind than it looks. Drywall dust gets into vents and light fixtures, paint and adhesive end up on glass and floors, and every ledge holds a film of grit. In the East Valley, fine desert dust blows in through open doors all through the build and makes it worse. Quality Choice Cleaning handles post-construction cleaning for commercial and residential projects across Chandler, Mesa, Tempe, Gilbert and greater Phoenix, so the space you hand over looks finished.

Construction Cleaning for Every Kind of Project

General Contractors

Phase cleaning on your schedule, from rough clean after drywall to the final clean before the owner walk-through.

Tenant Improvements

Office, retail and medical build-outs cleaned so the tenant can move in and open without a second crew.

Builders & Remodelers

New homes, units and remodels cleaned top to bottom, ready for listing photos, inspections or move-in.

Three Phases, One Crew

Most commercial projects need cleaning at more than one point, not a single pass at the end. We work with your superintendent to plan the phases so dust and debris do not pile up between trades.

Rough clean: after framing and drywall, we clear debris, sweep and vacuum bulk dust so finish trades start on a clean site.

Final clean: after the trades are done, we clean every surface from the ceiling down: vents, fixtures, cabinets, glass, restrooms and floors.

Touch-up clean: right before the walk-through or opening, we catch dust that settled after the final and handle any punch-list mess.

Want the full list? Read our post-construction cleaning checklist.

What a Final Clean Covers

Why builders in the East Valley call us

We are a family-owned company based in Chandler, licensed and insured, and we have been cleaning commercial spaces for more than 15 years. That matters on a job site: you need a crew that shows up when the schedule says, works around the trades still on site and does not need to be walked through what a final clean means.

We bring our own equipment and supplies, and we clean from the top down so dust from high surfaces does not land on floors we have already finished. When a project finishes in phases, we can clean each area as it is released instead of waiting for the whole building.

What does it cost?

Commercial post-construction cleaning is usually priced per square foot, per phase. The final clean costs the most because it is the most detailed. Size, how much dust and debris is left, window and glass count, ceiling height and your deadline all move the number. Our post-construction cleaning cost guide covers typical ranges. For a real number, send us your plans or book a free site walk.

After handover

Once the space is occupied, we can stay on as the regular cleaning crew with scheduled janitorial services or office cleaning. For apartments and rental units, see our property turnover cleaning.

Where we work

Our office is on North Washington Street in Chandler, and we handle post-construction cleaning across the East Valley and greater Phoenix, including Mesa, Tempe, Gilbert, Scottsdale, Phoenix, Glendale, Queen Creek, Peoria, Maricopa and Casa Grande. We also work in Ahwatukee, San Tan Valley, Sun Lakes, Apache Junction and Fountain Hills. See all our service areas, or call (480) 997-7742 if you are not sure your site is in range.

More Ways We Can Help

Janitorial Services

Office Cleaning

Commercial Deep Cleaning

Property Turnover Cleaning

Cleaning Guides

Get a Free Quote

Frequently Asked Questions

Removing leftover debris and packaging, vacuuming and wiping construction dust from every surface (including vents, ledges, door frames and light fixtures), cleaning windows, glass and frames, scrubbing restrooms and break areas, peeling protective film and stickers, and detailing floors so the space is ready for a walk-through or move-in.

A rough clean happens while trades are still working, usually after drywall and before paint, to clear debris and bulk dust. The final clean comes after the trades are done and is the detailed, top-to-bottom clean. A touch-up (sometimes called a puff or sparkle clean) happens right before the owner walk-through or opening to catch dust that settled after the final.

Most commercial post-construction cleaning is priced per square foot and per phase, with the final clean costing the most. Our post-construction cleaning cost guide walks through typical ranges and what moves the price. For your project, we give a free estimate after seeing the plans or walking the site.

Yes. We schedule around your superintendent and the remaining trades, and we can come back for a touch-up once punch-list work is finished so the space is clean for the final walk-through.

Yes. We bring the vacuums, ladders, cleaning products and supplies the job needs. You do not need to provide anything except access to water and power on site.

Call (480) 997-7742 with your square footage, the phase you need and your target date. We respond to quote requests within 24 hours, and rush or emergency cleaning is available on request.

Need a Construction Clean on Your Schedule?

Send us your square footage, the phase you need and your target date. We respond to quote requests within 24 hours.